CURETAPE-127

Manufacturer

Description

CURETAPE is a non-cured "B-staged" non-silicone rubber that can be formed into complex shapes to assist in the even application of pressure on assemblies. CURETAPE should be used where normal bagging procedures cause difficulty in preventing bridged conditions in the film. It should also be used where normal bagging procedure could cause unwanted markoff on the assembly.

CURETAPE is a not a silicone product and requires a release film between the rubber and the assembly being cured.

Application

CURETAPE should be used where it can assist in the even distribution of cure pressure and where a high quality surface is necessary. CURETAPE can be used many times after the material has been formed to the desired shape during the original cure of the assembly. CURETAPE can be used as pads for tooling pins, sharp edges, etc. Interleaving with a fiberglass cloth during the initial forming can reduce the effects of shrinkage during subsequent cures.

Properties

Standard Thickness: .125" (3.17mm)
Standard Widths: .750" and 1.00" (19 mm and 25.4 mm)
Roll Length: 25'/rl. (7.6 m)
Standard cure temperature To 400F (204C)

NOTE: Shelf life limitations apply.

Data Sheet

Curetape 127

Material Safety Data Sheet (MSDS)

Curetape 127

Having Problems Viewing a File?

MSDS documents are in Adobe PDF format. To view PDF files, you must have Adobe Acrobat installed on your computer. Download the free Adobe Acrobat reader.

Note: Technical information furnished is based on laboratory findings and is believed to be correct. No warranties of any kind are made except that the materials are of standard quality. All risk and liabilities arising from handling, storage and use of product, as well as compliance with applicable legal restrictions rest with the user. Nothing herein is to be taken as permission, inducement or recommendation to practice any patented invention or process without a license.