Manufacturer

Richmond Aircraft Products

Description

SM5170 TACKYTAPE® is specifically used whenever a positive bag seal is required during fabrication of composite parts. The tape releases easily from composite parts and other difficult tools. It performs in both oven and autoclave applications by tenaciously adhering nylon films to the tool surfaces. This is accomplished over a broad temperature range of room temperature to 450ºF (232ºC). It strips easily from the tool surfaces warm or cold. SM5170’s compatibility, tenacious adhesion, and unique curing characteristics make it the premier choice for use in the Aerospace industry.

Application

Apply by hand to a clean dry tool or platen with release paper on top. When the sealant is in position remove the release paper and lay the film on top. Apply pressure by hand or roller on the sealant to obtain maximum adhesion and to ensure positive vacuum. The bag may be stripped off the tool warm or cold after the cure cycle without leaving a residue. It is recommended to strip below 150ºF to minimize or reduce the parts from becoming warped.

Properties

COLOR: Natural
PERCENT SOLID: 100%
CONSISTENCY: Cone Penetration
                      95 - 105
                      300 GRAM LOAD
                      ASTM D-217
WEIGHT/GALLON: 10.0 LBS/GALLON (1.2 Kg/L)
FREIGHT CLASSIFICATION: Caulking Compound, NOIBN (NO LABEL REQUIRED)
STORAGE: Keep in cool dry place. SM5170 Tacky Tape® has a 12 month shelf life from date of manufacture when stored at or below 80ºF (27ºC). Do not store cartons on end, keep flat.

PERFORMANCE TEMPERATURE RANGE:
Application Temperature Range: 45ºF (7ºC) to 120ºF (49ºC)
Service Temperature Range: Room temperature to 450ºF (232ºC)

*=Manufactured by Schnee Morehead distributed by Richmond Aircraft Products